dam ›› 2013, Vol. 0 ›› Issue (6): 9-.

Previous Articles     Next Articles

Design of crane beam of Xiaoshankou Ⅱ hydropower station on Kaidu River, Xinjiang

KANG Ying-bin, ZHANG Fang, HU Lian-chao and WANG Shi-chuang   

  • Received:2013-10-19 Online:2013-12-31 Published:2013-12-31

新疆开都河小山口二级水电站吊车梁设计

康迎宾,张方,胡连超,王世闯   

  1. 1.华北水利水电大学,河南  郑州,450011;2.安徽水安建设集团股份有限公司,安徽 合肥,230071
  • 作者简介:康迎宾(1965- ),男,河南禹州人,水利部水务研究中心副主任,教授,研究方向为坝工理论与技术和现代水利水电施工技术与管理。

Abstract: Crane of hydropower station is mainly used to hoist the turbine and generator. Crane beam is one of the important structures in power-house bearing load. For good quality and effect of crane beam, its design must meet the requirements of specification. Design and structure analysis of the crane beam of Xiaoshankou Ⅱ hydropower station was carried out using Lizheng structural solver. The result showed that the structure and the reinforcement of crane beam can meet the design requirements.

Key words: crane beam, Lizheng structural solver, structure design, Xiaoshankou Ⅱ hydropower station

摘要: 水电站厂房的吊车主要用于吊装水轮机与发电机。承受吊车荷载的吊车梁是厂房上部承重的重要结构之一,必须严格按照要求进行设计,以保证吊车梁的质量和使用效果。采用理正结构求解器对新疆开都河小山口二级水电站吊车梁进行了设计和结构计算分析,得出吊车梁的结构与配筋满足设计要求。此吊车梁设计的成功为今后类似工程提供了很好的参考。

关键词: 吊车梁, 理正结构求解器, 结构设计, 小山口二级水电站