dam ›› 2015, Vol. 0 ›› Issue (6): 63-.

Previous Articles     Next Articles

Parameter selection for loess rolling construction in Daliang reservoir

ZHANG Li   

  1. Water Conservancy Survey and Design Institute of Linfen, Shanxi Province
  • Received:2015-05-04 Revised:2015-09-28 Online:2015-12-08 Published:2015-12-08

大梁水库主坝黄土碾压施工参数的选择

张   莉   

  1. 山西省临汾市水利勘测设计院,山西 临汾,041000
  • 作者简介:张 莉(1971- ),女,山西临汾人,工程师,主要从事水利工程设计工作。

Abstract: Main dam of Daliang reservoir, a regulating reservoir on north main-line of Shanxi Wanjiazhai Yellow River Diversion Project, is a sand-gravel-fill dam with loess core. Due to the large amount of filling, compaction is a key process to control the construction quality. Thus construction method and parameters must be determined by relevant site experiments, such as the rolling equipments, placing thickness, placing method, rolling times, the amount of water, effective compaction thickness, etc.

Key words: loess, rolling experiment, construction parameter

摘要: 大梁水库是山西省万家寨引黄工程北干线上的一座调节水库,主坝为黄土心墙砂砾料混合坝。主坝黄土填筑工程量大,压实是控制碾压式土石坝施工质量的关键工序。由于土料的离散特性,必须通过碾压试验确定压实机具、铺料方法、铺料厚度、压实方法、碾压遍数、加水量和有效压实厚度等施工方法与参数。

关键词: 黄土, 碾压试验, 施工参数