Underwater cutting using sacrificial anode for drilling platform

dam

Previous Articles Next Articles

Underwater cutting using sacrificial anode for drilling platform

CHEN Xiao-qiang, LI Xiao-hong,WANG Fu-qiang and ZHU Xiao-jun

Naval Submarine Academy of PLA

Received:2014-03-18 Online:2014-08-08 Published:2014-08-08

钻井平台水下牺牲阳极的切割

陈晓强，李晓虹，汪福强，朱小俊

海军潜艇学院，山东青岛，266042

作者简介:陈晓强（1976-），男，硕士，主要从事水下焊接与切割技术的研究和教学。

Abstract

Abstract: In this paper, the difficulty, parameter selection and the implementation process of underwater cutting using sacrificial anodes at Wenchang 13-2 oil field were presented, for reference.

Key words: underwater cutting, sacrificial anode, parameter, selection

摘要： 叙述了对文昌13-2油田深水中几处牺牲阳极块进行水下切割时的施工难度、工艺参数选择及具体施工过程，供参考交流。

关键词: 水下切割, 牺牲阳极, 参数, 选择

CHEN Xiao-qiang, LI Xiao-hong,WANG Fu-qiang and ZHU Xiao-jun. Underwater cutting using sacrificial anode for drilling platform[J]. dam.

陈晓强，李晓虹，汪福强，朱小俊. 钻井平台水下牺牲阳极的切割[J]. 大坝与安全.

[1]	YUAN Lei and MA Hongyu. Selection of earth- rock dam types for Yulong Kashi water conservancy project in Xinjiang [J]. Dam & Safety, 2020, 0(2): 25-.
[2]	LI Qiande, WANG Dong, LI Xiaoxiao and LIU Jian. Research on dam deformation prediction based on QPSO-RVM model [J]. Dam & Safety, 2020, 0(1): 32-.
[3]	CHEN Lei, XU Wei and MA Zhiyong. Research on contract adjustment mechanism based on engineering geological risk [J]. Dam & Safety, 2019, 0(6): 26-.
[4]	LUO Hao, DAI Xiao-long, SHAO Peng-zhe and ZHANG Bo. Calibration by system response for prediction model parameters and application test in Jinping hydropower station [J]. Dam & Safety, 2019, 0(2): 16-.
[5]	HU Ting，TANG Hai-tao, MA Cang and YANG Li-guo. Research and application of cable laying technology for hydropower house based on BRCM software [J]. Dam & Safety, 2018, 0(6): 23-26.
[6]	HAN Yong. Stress-strain analysis of concrete face rockfill dam during completion period based on parameter inversion method [J]. Dam & Safety, 2018, 0(6): 56-60.
[7]	DU Jia-jia, DU Guo-ping, CAO Jian-hui, SONG Xiao-feng, DU Jia-li and DU Guang-lin. Study on visualized-imaging of sonar detection for measurement of high dams with large seepage [J]. dam, 2016, 0(2): 37-.
[8]	ZHAO Jian-chun, DU Xiao-ping, XIONG Yan-mei, CHENG Yao-ping and WEI Fang. Study on dam type selection and design of dynamic tidal power project [J]. dam, 2015, 0(6): 1-.
[9]	ZHANG Li. Parameter selection for loess rolling construction in Daliang reservoir [J]. dam, 2015, 0(6): 63-.
[10]	ZHU Hong, LIN Jian and SUN Yan- qin. Review and selection of geomechanics parameters of dam foundation of F₆₇ fault at block No. 34~36 of a hydropower station in Northeast China [J]. dam, 2015, 0(2): 33-.
[11]	HUANG Wei and FU Shi-ping. Selection of physical mechanical parameters for the colluvial clay on the left bank of Shaping hydropower station [J]. dam, 2014, 0(2): 21-25.
[12]	ZHU Jin-feng, XU Si-chen and XU Gang. Dam monitoring sensor based on the intelligent identification technology [J]. dam, 2013, 0(1): 21-.
[13]	. Investigation on divisional inversion of dam mechanic parameters based on improved PSO algorithms [J]. , 2012, 0(3): 30-34.
[14]	. Study on route selection of strip road based on UAV aerial photogrammetry [J]. , 2012, 0(2): 35-38.
[15]	. Design of navigation lock in water level regulation project for Shuikou downstream hydro-junction [J]. , 2011, 0(5): 7-10.

Underwater cutting using sacrificial anode for drilling platform

钻井平台水下牺牲阳极的切割

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments